Your location:
HOME
News
Company News
TAIC (Triallyl Isocyanurate), as a photocrosslinking agent, exhibits remarkable advantages in improving material properties and adapting to various processes owing to its unique multifunctional structure. However, it also has shortcomings such as limited compatibility and a tendency to cause side reactions, as detailed below:
1、High and efficient crosslinking performance: TAIC molecules contain three allyl functional groups, which can rapidly undergo crosslinking reactions with double bonds in various polymer materials under UV irradiation, significantly increasing the crosslinking density of materials. For example, adding 1%–3% of TAIC to photovoltaic EVA films can boost the crosslinking density by 20%. As the most effective co-crosslinking agent for peroxide crosslinking of EVA, its efficiency surpasses common crosslinking agents including divinylbenzene and trimethylolpropane trimethacrylate, enabling materials to form a stable three-dimensional network structure.
2、Significantly improved comprehensive material properties: Crosslinking with TAIC comprehensively optimizes substrate performance. It enhances the heat resistance of EVA, polyethylene and other materials, and greatly improves the heat resistance of chlorinated polyethylene in peroxide vulcanization systems. It strengthens the weather resistance of photovoltaic films: accelerated aging tests show that the performance of EVA films containing TAIC decreases by only 5%, far better than that of unmodified counterparts. It also elevates mechanical strength, solvent resistance and electrical properties. For cable materials, it improves flame retardancy and electrical insulation, meeting the requirements of high-voltage applications.
3、Compatibility with diverse materials and processes: TAIC has an extremely wide application scope. It can serve as a photocrosslinking modifier for thermoplastics such as polyethylene, PVC and polystyrene, as well as special rubbers including ethylene-propylene rubber and fluororubber. It is compatible with multiple processes such as UV curing and radiation crosslinking. In radiation crosslinking, the dosage is only 0.5%–2%, and no additional initiators like dicumyl peroxide are required, simplifying the process and eliminating the odor caused by peroxides.
4、Easier processing and storage: TAIC is solid at room temperature with low volatility. Compared with volatile liquid crosslinking agents, it is more convenient for transportation, storage and metered addition, reducing volatile loss and environmental pollution during production. Proper addition also improves the flowability of molten materials, ensuring more uniform mixing and curing and lowering the defect rate of finished products.
1、Poor compatibility in high-temperature environments: TAIC has a low melting point, and its volatility increases sharply at processing temperatures above 200°C. Especially for high-processing-temperature materials such as fluoropolymers, it emits large amounts of toxic fumes due to volatilization and reduces crosslinking stability because of self-loss. Additionally, its cyclic urea core structure is more susceptible to thermal degradation than some polymer backbones, further restricting its use in high-temperature processing.
2、Prone to side reactions that impair product quality: TAIC readily undergoes self-polymerization. In EVA film crosslinking, self-polymerization limits the mechanical properties and moist-heat resistance of cured films. In the early stage of rubber vulcanization, it undergoes cyclopolymerization and grafting onto rubber molecules, consuming free radicals and temporarily interfering with normal crosslinking. For materials like fluororubber, its non-fluorinated structure leads to poor miscibility with base polymers, causing agglomeration before vulcanization and homopolymerization during vulcanization, resulting in defects in the elastomer network.
3、Incompatibility with some materials: TAIC shows poor compatibility with special substrates such as fluoropolymers and cannot disperse efficiently as in EVA or polyethylene; specific additives are required to ensure uniform crosslinking. The alkyl C–H bonds formed after crosslinking are much less stable than the C–F bonds in fluoropolymer backbones, compromising the overall structural stability of such materials.
4、High synthesis and purification costs: Traditional synthesis processes feature long reaction times and abundant side reactions. Although new processes such as the solvent method have brought improvements, precise control of catalysts, reaction temperature and other parameters is still necessary. Meanwhile, the separation and purification of products are complex, and substandard purity directly weakens crosslinking efficiency. These factors keep the production cost of high-purity TAIC high, reducing its competitiveness in price-sensitive low-end product markets.