Your location:
HOME
News
Company News
TAIC, as a photocrosslinking agent, has important applications in multiple UV curing fields, including UV curing modification of organic glass, preparation of ion exchange resins, UV-curable coatings and adhesives, and UV vulcanization of special rubbers. The details are as follows:
Common polyacrylate-based organic glass has poor heat resistance, which limits its application in high-temperature scenarios. TAIC can act as a modifier to participate in the UV curing process of organic glass. Its multi-allyl structure can undergo crosslinking reactions with polyacrylate molecules under UV irradiation, forming a dense three-dimensional network structure. The organic glass modified by TAIC has significantly improved heat resistance, while maintaining optical transparency basically unchanged. It also optimizes processing and molding properties, making it suitable for manufacturing optical components, automotive lampshades and other products that need to withstand certain temperatures.
Ion exchange resins are commonly used in water treatment, chemical purification and other fields, and have high requirements for structural strength, acid and alkali resistance, and anti-fouling properties. When TAIC is used as a photocrosslinking agent for UV curing of such resins, the dosage is lower but the effect is better than that of traditional divinylbenzene crosslinking agents. Under UV irradiation, TAIC can quickly initiate crosslinking of resin monomers, forming a large-pore, high-strength resin structure. Such TAIC-crosslinked resins not only have improved mechanical strength, but also exhibit excellent heat resistance and oxidation resistance. They can resist erosion by acid-alkali environments in water treatment, reduce pollution and clogging issues, and are suitable for advanced wastewater treatment in industrial applications.
TAIC serves as both a crosslinking agent for UV curing coatings and a key raw material for synthesizing related coating intermediates. For example, in UV curing topcoats for furniture and building materials, adding TAIC followed by UV irradiation increases the crosslinking density of the coating film after formation, significantly enhancing the hardness, scratch resistance and weather resistance of the coating. It is resistant to fading and cracking even after long-term exposure to the outdoors. In UV curing adhesives used for bonding glass or ceramics, TAIC's participation in crosslinking improves the bonding strength and high temperature resistance of the adhesive. After curing, it can withstand temperatures above 100°C, and the bonding interface is not easy to fall off due to temperature changes. It can also be used for bonding multi-layer safety glass.
Special rubbers such as ethylene-propylene rubber and fluororubber are commonly used in products like seals and high-temperature hoses. UV vulcanization is one of its efficient molding processes, and TAIC acts as a co-crosslinking agent in this process. For example, in the production of high-temperature resistant seals for automobile engines, TAIC is added to the ethylene-propylene rubber formula at a ratio of 0.5%-4%, followed by UV irradiation for vulcanization. This accelerates the crosslinking rate of the rubber, while significantly optimizing its heat resistance and compression set performance. It can maintain sealing performance for a long time in the high-temperature environment of automobile engines. In the production of fluororubber hoses, TAIC's participation in UV crosslinking improves the wear resistance and chemical corrosion resistance of the hoses, making them suitable for conveying corrosive media in chemical industry scenarios.
Polystyrene products have good transparency but high brittleness and poor weather resistance. TAIC can modify them through UV crosslinking. For example, in the production of polystyrene products such as transparent decorative parts and small instrument housings, adding TAIC followed by UV irradiation causes TAIC to undergo copolymerization and crosslinking reactions with styrene molecules. The modified products not only retain the original high transparency, but also have significantly reduced brittleness, improved fracture resistance, and enhanced weather resistance. They are not easy to yellow and age under long-term light exposure, broadening the application range of polystyrene products.
Polyvinyl chloride (PVC) is commonly used in products such as films and pipes, but its heat resistance and solvent resistance need to be optimized through crosslinking. TAIC has a sensitizing effect on the UV crosslinking of PVC and can be used as a photo-radiation crosslinking agent. In the production of PVC packaging films, adding TAIC followed by UV curing improves the heat resistance of the film, making it suitable for heat-sealing processes in food packaging, and enhances its resistance to oils and other solvents. It will not be damaged when in contact with oils in food. In the UV curing treatment of PVC pipes, TAIC's participation in crosslinking improves the compressive strength and acid-alkali corrosion resistance of the pipes, making them suitable for scenarios such as chemical pipelines.